18 Years Factory 1/4 Inch Copper Foil - STD Standard Copper Foil – JM
18 Years Factory 1/4 Inch Copper Foil - STD Standard Copper Foil – JM Detail:
The STD series is an IPC grade 1 copper foil intended for use as the outer layer of rigid boards. It is available in thicknesses ranging from a minimum 12 µm to a maximum ED copper foil thickness of 140 µm. This is the only ED copper foil available in the 105 µm and 140 µm thicknesses, making it ideal for boards designed as heat sinks or to conduct large electrical currents.
Features
● The treated foil in grey or red
● High peel strength
● Good etch ability
● Excellent adhesions to etching resist
● Excellent corrosion resistance
Typical application
● Phenolic
● Epoxy board
● CEM-1, CEM-3
● FR-4, FR-3
● This is our standard ED copper foil product with the longest history of use as an outer layer for rigid boards.
Surface quality
● 0 splices per coil
● Foil to have uniform colour, cleanliness and flatness
● No obvious pitting, pin holes or corrosion
● No surface defects such as creases, spots or lines
● Foil must be oil free and have no visible oil spots
Typical properties of High Temperature Elongation Copper Foil
|
Classification |
Unit |
Requirement |
Test Method |
|||||||
|
Nominal thickness |
Um |
12 |
18 |
25 |
35 |
70 |
105 |
IPC-4562A |
||
|
Area Weight |
g/m² |
107±5 |
153±7 |
228±7 |
285± 10 |
585± 20 |
870±30 |
IPC-TM-650 2.2.12.2 |
||
|
Purity |
% |
≥99.8 |
IPC-TM-650 2.3.15 |
|||||||
|
roughness |
Shiny side (Ra) |
սm |
≤0.43 |
≤0.43 |
≤0.43 |
≤0.43 |
≤0.43 |
≤0.43 |
IPC-TM-650 2.3.17 |
|
|
Matte side(Rz) |
um |
≤6 |
≤8 |
≤10 |
≤10 |
≤15 |
≤20 |
|||
|
Tensile Strength |
R.T.(23°C) |
Mpa |
≥150 |
≥220 |
≥235 |
≥280 |
≥280 |
≥280 |
IPC-TM-650 2.4.18 |
|
|
Elongation |
R.T.(23°C) |
% |
≥2 |
≥3 |
≥3 |
≥4 |
≥4 |
≥4 |
IPC-TM-650 2.4.18 |
|
|
Resistivity |
Ω.g/m² |
≤0.17 |
≤0.166 |
≤0.162 |
≤0.16 2 |
≤0.162 |
≤0.162 |
IPC-TM-650 2.5.14 |
||
|
Peel Strength(FR-4) |
N/mm |
≥1.0 |
≥1.3 |
≥1.6 |
≥1.6 |
≥2.1 |
≥2.1 |
IPC-TM-650 2.4.8 |
||
|
Lbs/in |
≥5.1 |
≥6.3 |
≥8.0 |
≥11.4 |
≥11.4 |
≥11.4 |
||||
|
Pinholes & porosity |
Number |
|
No |
IPC-TM-650 2.1.2 |
||||||
|
Anti-oxidization |
R.T.(23°C) |
|
|
180 |
|
|||||
|
R.T.(200°C) |
|
|
60 |
|||||||
Standard Width, 1295(±1)mm, Width range: 200-1340mm. May according to the customer request tailor.
Product detail pictures:
Related Product Guide:
That has a positive and progressive attitude to customer's interest, our organization consistently improves our products quality to satisfy the demands of shoppers and further focuses on safety, reliability, environmental specifications, and innovation of 18 Years Factory 1/4 Inch Copper Foil - STD Standard Copper Foil – JM , The product will supply to all over the world, such as: Bhutan, Macedonia, Uzbekistan, In order to meet more market demands and long-term development, a 150, 000-square-meter new factory is under construction, which will be put into use in 2014. Then, we shall own a large capacity of producing. Of course, we will continue improving the service system to meet the requirements of customers, bringing health, happiness and beauty to everyone.
By Elsie from Armenia - 2018.06.03 10:17
The customer service staff's answer is very meticulous, the most important is that the product quality is very good, and packaged carefully, shipped quickly!
By Bertha from Munich - 2018.12.14 15:26
