Top Suppliers 1 Mil Copper Foil - STD Standard Copper Foil – JM
Top Suppliers 1 Mil Copper Foil - STD Standard Copper Foil – JM Detail:
The STD series is an IPC grade 1 copper foil intended for use as the outer layer of rigid boards. It is available in thicknesses ranging from a minimum 12 µm to a maximum ED copper foil thickness of 140 µm. This is the only ED copper foil available in the 105 µm and 140 µm thicknesses, making it ideal for boards designed as heat sinks or to conduct large electrical currents.
Features
● The treated foil in grey or red
● High peel strength
● Good etch ability
● Excellent adhesions to etching resist
● Excellent corrosion resistance
Typical application
● Phenolic
● Epoxy board
● CEM-1, CEM-3
● FR-4, FR-3
● This is our standard ED copper foil product with the longest history of use as an outer layer for rigid boards.
Surface quality
● 0 splices per coil
● Foil to have uniform colour, cleanliness and flatness
● No obvious pitting, pin holes or corrosion
● No surface defects such as creases, spots or lines
● Foil must be oil free and have no visible oil spots
Typical properties of High Temperature Elongation Copper Foil
Classification |
Unit |
Requirement |
Test Method |
|||||||
Nominal thickness |
Um |
12 |
18 |
25 |
35 |
70 |
105 |
IPC-4562A |
||
Area Weight |
g/m² |
107±5 |
153±7 |
228±7 |
285± 10 |
585± 20 |
870±30 |
IPC-TM-650 2.2.12.2 |
||
Purity |
% |
≥99.8 |
IPC-TM-650 2.3.15 |
|||||||
roughness |
Shiny side (Ra) |
սm |
≤0.43 |
≤0.43 |
≤0.43 |
≤0.43 |
≤0.43 |
≤0.43 |
IPC-TM-650 2.3.17 |
|
Matte side(Rz) |
um |
≤6 |
≤8 |
≤10 |
≤10 |
≤15 |
≤20 |
|||
Tensile Strength |
R.T.(23°C) |
Mpa |
≥150 |
≥220 |
≥235 |
≥280 |
≥280 |
≥280 |
IPC-TM-650 2.4.18 |
|
Elongation |
R.T.(23°C) |
% |
≥2 |
≥3 |
≥3 |
≥4 |
≥4 |
≥4 |
IPC-TM-650 2.4.18 |
|
Resistivity |
Ω.g/m² |
≤0.17 |
≤0.166 |
≤0.162 |
≤0.16 2 |
≤0.162 |
≤0.162 |
IPC-TM-650 2.5.14 |
||
Peel Strength(FR-4) |
N/mm |
≥1.0 |
≥1.3 |
≥1.6 |
≥1.6 |
≥2.1 |
≥2.1 |
IPC-TM-650 2.4.8 |
||
Lbs/in |
≥5.1 |
≥6.3 |
≥8.0 |
≥11.4 |
≥11.4 |
≥11.4 |
||||
Pinholes & porosity |
Number |
|
No |
IPC-TM-650 2.1.2 |
||||||
Anti-oxidization |
R.T.(23°C) |
|
|
180 |
|
|||||
R.T.(200°C) |
|
|
60 |
Standard Width, 1295(±1)mm, Width range: 200-1340mm. May according to the customer request tailor.
Product detail pictures:
Related Product Guide:
We not only will try our greatest to present fantastic expert services to each purchaser, but also are ready to receive any suggestion offered by our prospects for Top Suppliers 1 Mil Copper Foil - STD Standard Copper Foil – JM , The product will supply to all over the world, such as: New Zealand, Monaco, Stuttgart, With the support of our highly experienced professionals, we manufacture and supply best quality products. These are quality tested at various occasions to ensure only flawless range is delivered to customers, we also customize the array as per the need of customers to meet the requirement of customers.
By Helen from Vancouver - 2017.11.01 17:04
The factory technical staff not only have high level of technology, their English level is also very good, this is a great help to technology communication.
By Cara from Czech republic - 2017.09.16 13:44